Re: [MW:30854] Radiography can be done After Hydrotest

Yes, you can do. provided your graphs should have within limited indications as per acceptance table. 

In case any one weld goes repair hydro test shall be done. 

Regards, 

S.SENTHILKUMAR 

Sent from Yahoo Mail on Android

On Sat, 9 May 2020 at 6:12, pradip kumar Sil

<pradipsil@gmail.com> wrote:

Dear All,

 Radiography  can be done after Hydrotest. What's the limitation of  ASME B-31.3.

Before Hydrotest all Radiography can be completed. ASME -B-31.3 Code reference ?

Your advice is highly appreciated with code reference ASME B-31.3.

Regards,

Pradip

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8%3DwM9yo%2B%3DLuNU3J185gWHOmY5DHvxnpvLz_uF3BVnjkUg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1568662456.343936.1589002308836%40mail.yahoo.com.