Re: [MW:30882] CLARIFICATION ON PQR DATE

Satti, 

Hopefully you have done PQR using proposed WPS. Now you will compile all in one package  (PWPS, Parameters record, NDT, DT, Micro Macro etc..) Final compilation date is well acceptable. 

Regards, 

S.SENTHILKUMAR 

Sent from Yahoo Mail on Android

On Fri, 15 May 2020 at 16:05, sathishmech04@gmail.com

<sathishmech04@gmail.com> wrote:

Dear Experts

Kindly clarify below doubt's

Standard: ASME Sec IX

I have conducted procedure qualifications(welding done with recording all parameters) on 10/10/2019 and mechanical testing where conducted on 24/11/2019 in that all the testing were cleared. So my doubt is what date need to be endorsed that is during PQR generated test date or after mechanical test conducted date.

Kindly confirm

Regards.satti

--

https://materials-welding.blogspot.com/

https://www.linkedin.com/groups/122787

---

You received this message because you are subscribed to the Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0ae78523-7f75-457f-8941-d8289a5e4d84%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1642692915.38056.1589607876266%40mail.yahoo.com.