Dear Experts
Kindly clarify below doubt's
Standard: ASME Sec IX
I have conducted procedure qualifications(welding done with recording all parameters) on 10/10/2019 and mechanical testing where conducted on 24/11/2019 in that all the testing were cleared. So my doubt is what date need to be endorsed that is during PQR generated test date or after mechanical test conducted date.
Kindly confirm
Regards.satti
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0ae78523-7f75-457f-8941-d8289a5e4d84%40googlegroups.com.
Subscribe to:
Post Comments (Atom)
Re: [MW:35241] Overlay welding defects
Dear Sir, The below is another type of defect,Mostly these two type of defects we faced. Regards, R.Gowtham. On Wed, Sep 11, 2024 at 1:42 PM...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment