Re: [MW:30557] Re: PQR mentioning position 3G and our WPS stated 1G

IF position not an essential variables, why need to change WPS  1G and add 6G position?

понедельник, 20 октября 2014 г., 16:29:28 UTC+5 пользователь dili...@gmail.com написал:

If your Code is ASME and if your project specifications do not include any additional requirements, then you may proceed as follows:
Position is not an essential variable for WPS qualification, so you do not need a new PQR.
You draft a new WPS based on the essential variables of the existing PQR and you include also the position 6G.
Then you can qualify the welder

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor


I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS HELLAS

Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
(See attached file: Dilintas_George.vcf)

Mohammed Zakeruddin ---20/10/2014 08:40:47---Dear All, Kindly advise,

From: Mohammed Zakeruddin <zaker....@gmail.com>
To: material...@googlegroups.com
Date: 20/10/2014 08:40
Subject: [MW:22147] Re: PQR mentioning position 3G and our WPS stated 1G
Sent by: material...@googlegroups.com

---

Dear All,
Kindly advise,

1G Qualificaiton is mentioned on WPS & PQR and if we want to qualify the welder on 6G position, do we need to prepare new WPS and PQR or only PQR and WPS (1G) be the same....

Khan....

On Tuesday, November 16, 2010 11:27:05 AM UTC+4, israr wrote:

Dear,
You just delete position 1 g from wps and write All,
As per ASME Section IX if WPS is qualified in any one position of 1G
to 6G it is qualify for all the position.
Then u can attached nos of PQR with dirrent position following the
same WPS.

Regards
Israr Ahmed
Tata Projects Ltd.India
+919930308261

On Nov 11, 2:35 pm, Zulfan <zul...@insing.com> wrote:
> Dear all,
>
> please advice in our PQR mentioning position 3G and our WPS stated 1G
> is the WPS able to apply or need to run again PQR again?
> code ASME sec IX
>
> Thank
> zul

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to material...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

This message contains confidential information. To know more, please click on the following link: http://disclaimer.bureauveritas.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/aeef7d9d-e9b6-40ec-9f0b-d98e790ee499%40googlegroups.com.