Hi Kiran,
On Saturday, 8 February 2020 13:39:40 UTC+3, K K wrote:
-- Refer API-650_2014,
Section-4 (Clause 4.1.2 , 4.1.3 & 4.1.4) for all materials.
Clause :- 4.2 for Plates material specification requirements.
With Regards,
Kesavamoorthi.R.
On Saturday, 8 February 2020 13:39:40 UTC+3, K K wrote:
Dear All,I hope I will get good response from Material & Welding experts.The requirements for base materials in Tanks.
If base material (plates during receiving inspection) shows some corrosion or defect, which ones would be the recommended inspection
methods and acceptance criteria.
May be is included in API standard or in ASTM standard for each material. (For example A516 gr.70 or A283 gr.C).
Please which code shall i refer, please give me response in details.
Thanks in advance.
Regards
Kiran
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b363e8fb-8ff3-4c48-9e96-7f4f491eeb13%40googlegroups.com.
No comments:
Post a Comment