Tuesday, February 18, 2020

Re: [MW:30498] Welder Qualification in 3G position by 1G PQR

Need 3G qualification again. 

Regards 
A p gupta 
ThyssenKrupp 


On Mon, 17 Feb 2020 at 9:27, Brijesh Maurya
<brijeshmaurya492@gmail.com> wrote:
Dear expert,
please advice can i use 1G qualified PQR for Welder Qualification in 3G upward position? 
Note: No impact requirement.

regards,
Brijesh Maurya

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOBi_ePzg5MZyLqjYhPdQ%3D%2BGCizchu2u18XR%3DMGhg4LUAye4cg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1522244057.3612883.1581989764346%40mail.yahoo.com.

No comments:

[MW:35754] interpration

  Interpretation #: BPV IX-18-34  Record Number: 18-771  Subject Description: SC IX; QW-401.1 and QW-403.6 - Thickness Range Qualified for I...