Friday, February 7, 2020

[MW:30456] API 650 & 653

Dear All,

I hope I will get good response from Material & Welding experts.

The requirements for base materials in Tanks. 


If base material (plates during receiving inspection) shows some corrosion or defect, which ones would be the recommended inspection 


methods and acceptance criteria.


May be is included in API standard or in ASTM standard for each material. (For example A516 gr.70 or A283 gr.C).


Please which code shall i refer, please give me response in details.


Thanks in advance.


Regards

Kiran 


 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/49b21741-b20c-43c2-baaf-d8931e50dc33%40googlegroups.com.

No comments:

Re: [MW:35737] Bend Test and Tensile Test failed for ET45 Micro Welded Coupon

Hi As its %elongation is very low  Better try buttering on jt surrace with ductile consumable like pure Ni i. E Ni1 And later weld jt with c...