Dear Chitan,
Depending on your WPS and welding parameters, too many SAW wire/flux combinations could be used. Normally, AWS A5.23 - EA2 (S2Mo) or EM12 (S2) or EM12K (S2Si) wires in combination with different AB (Aluminate Basic) fluxes which could provide F8AX-EA2 mechanical properties would be suitable for you.
For more details, you have to provide your WPS & parameters then consult with your consumable manufacturer.
Regards
On Thu, Jan 30, 2020 at 12:51 PM Chintan <chintan51@gmail.com> wrote:
Dear Expert
Kindly advice on suitable flux and wire combination for x70 pipe
Joint type pipe to pipe cs
Pwht not applicable
Impact test not required
Thank you
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6cf1c290-d520-4788-9f83-566188fee35b%40googlegroups.com.
M. Shokri Arfaei
ASNT NDT Level III
International Welding Engineer
Mob.:+98 912 1394023
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC8uMtuzvrDq1j2nopebTjaGVQ_48vwSp7HD0rwm7cq7JtKNaQ%40mail.gmail.com.
No comments:
Post a Comment