Re: [MW:30516] Re: Impact Test

Impact for Weld is not required as E 7018-1 is upto minus 45 deg c, as per Code.  Check the GTAW Filler if you are using any.  

Most important check material of flange and pipe

Regards,
Prashant

On Wed, Feb 19, 2020, 2:09 PM prateik tolani <tolaniprateik@gmail.com> wrote:

Dear experts

We have job with MDMT -30 and -36 Deg C

Shell/Dish - SA516 Gr 70N

material will be received in impact tested condition

need to know whether weld impact test is required or not?

thickness is 8-10 mm.

welding electrode 7018-1

On Wed, Feb 19, 2020 at 2:06 PM prateik tolani <tolaniprateik@gmail.com> wrote:

Dear experts

We have job with MDMT -30 and -36 Deg C

Shell/Dish - SA516 Gr 70N

material will be received in impact tested condition

need to know whether weld impact test is required or not?

thickness is 8-10 mm.

welding electrode 7018-1

Thanks 

prateik

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGNY-_AMkqLQr%2BV0KXTtf%3DG%2BX03SpPg8z92ePJqHXO0PJpZctg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAkMc%3D6GaD_gJ7K9S%2Bt9%3DjDqCmyyeS1s9WxRWB6%3DZ2WDf4%2B4Fg%40mail.gmail.com.