Re: [MW:30490] Welder Qualification in 3G position by 1G PQR

Weld position is not an essential variable for wps 

On Mon, Feb 17, 2020, 09:27 Brijesh Maurya <brijeshmaurya492@gmail.com> wrote:

Dear expert,

please advice can i use 1G qualified PQR for Welder Qualification in 3G upward position? 

Note: No impact requirement.

regards,

Brijesh Maurya

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOBi_ePzg5MZyLqjYhPdQ%3D%2BGCizchu2u18XR%3DMGhg4LUAye4cg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPRS9UOA0ChxH64nDvNjpoqJh3oQq%2BFTTU%3DWR7AiZPmyU0s%2BfA%40mail.gmail.com.