[MW:30461] Re: API 650 & 653

Thanks Kesava,

Can you please explain me more regarding corrosion or defect, inspection methods and acceptance criteria.

And for your information i don't have experience in API Tanks.

So for please explain me in details. And you have not addressed API 653.

And thanks for your reply.

On Monday, February 10, 2020 at 12:46:30 PM UTC+5:30, k7moorthi wrote:

Hi Kiran,

Refer API-650_2014, 

Section-4 (Clause  4.1.2 , 4.1.3 & 4.1.4) for all materials.

Clause :- 4.2 for Plates material specification requirements.

With Regards,

Kesavamoorthi.R.

On Saturday, 8 February 2020 13:39:40 UTC+3, K K wrote:

Dear All,

I hope I will get good response from Material & Welding experts.

The requirements for base materials in Tanks. 

If base material (plates during receiving inspection) shows some corrosion or defect, which ones would be the recommended inspection 

methods and acceptance criteria.

May be is included in API standard or in ASTM standard for each material. (For example A516 gr.70 or A283 gr.C).

Please which code shall i refer, please give me response in details.

Thanks in advance.

Regards

Kiran 

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/0c7c2abe-e036-4bda-a114-3275c606d1ea%40googlegroups.com.