Re: [MW:30516] cswip 3.2 material and current exam pattern

CSWIP 3.2 Examination



There are four sections to the examination each will require 70% pass mark for the qualification to
be awarded.

▪ Part 1 General Multi-choice 30 Questions
45 minutes

▪ Part 2 Scenario multi choice 60 questions
150 minutes

▪ Part 3  Assessment of four NDT Reports 40 Questions
75 minutes

▪ Part 4  The interpretation of weld symbols using a drawing 10 questions
30 minutes















Copyright © TWI Ltd

On Tue, 18 Feb 2020 at 15:17, shanmuganathan .subbiah <shanmuganathan.subbiah@gmail.com> wrote:

Hai

Current exam pattern

1. Objective type question 30

2.Practical one plate

3. RT film interpretation 6 nos ( if cswip 3.2.2)

Thanks & Regards

Shanmuganathan subbiah

On Tue, 18 Feb 2020, 04:57 jaisen antin, <jaisen03@gmail.com> wrote:

hi all,

           anyone know the cswip 3.2 current exam pattern and also please send the syllabus book.thanks in advance

--

Thanks 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKZAhFPQ8AOxK1yPcdRg0CabNwJU7wWw6nVy44XFFp-s_Vz%2BGQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAD2bsBQ%3D%2Bi%3D4HyubvXOL1mBYK6VivewQbeEyNTWTRxXSp6UntQ%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGKnWWiV8n2vpi2BDMFKogXCVkgGbNUJS_hyOSf%3D_AcMdM6Ekg%40mail.gmail.com.