Re: [MW:30483] Valve both end having different pressure temperature rating

Hi,

Logically the HP side rating would govern.

Thanks

On Wed, 12 Feb 2020, 11:14 Muhammed Ibrahim PK, <ibratech@gmail.com> wrote:

Gents, 

Please privide an answer fore below condition. If a valve to be installed between a line where both ends are having different pressure temperature rating. What will govern?  Higher PT rating or low PT rating? 

Reg, 

Ibrahim

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmPJDfR8wPYYEzWFokEk6ReyNccMA8%2Bviu8TSWmMz8sFpg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABnNWHU3gWX5%2Bk%2BxuCotWG%2Bpb28kspx8bjz%2B0jYWxNpG_duhew%40mail.gmail.com.