Re: [MW:30470] WPS -QUERY

No, 

Refer QW-424 Table

Thanks and Regards

Rameshkannan Devaraj

"What you have learned is a mere handful; What you haven't learned is the size of the world – Avvaiyar"

On Tue, Feb 11, 2020 at 3:34 PM Hasin Shaikh <hasin.shaikh@gmail.com> wrote:

Dear Sir

Good day

Query about use of wps..

I have approved WPS for "Unassigned Material to P1 Material " CAN i use the same WPS to weld P1 TO P1 material ? clause reference please.

kindly advise

--

*With Regards
Shaikh.Hasin
Email: hasin.shaikh@gmail.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMu5BBAwtgqbzAyrWPfhrguyv_1ssfO43yAAJd3AFXrb5Xv%3Dqw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMaSVcF4s_3kZWTNmkEz5Z5hjNBRkZ5gzUmE3ndeRfvVY-_vcg%40mail.gmail.com.