read carefuly QW 283 totally to understand the requirements. nowhere given 1/3 of thick or 10mm
it is not less than 3/16 or 5mm
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
--Greetings,First of clear whether you want to make buttering on machined parts or weld joints or any damaged parts?Buttering: read QW-283 fully and 283.3.Weld repair or build up: check QW-202.3.Usually company standards specifies, Buttering or weld build-up on the prepared surfaces shall not exceed the lesser of ⅓ of the base metal thickness or 10 mm, if exceeds you need company approval, this is just request upon certain owner requirements.Thanks.
Regards,Mohamed Muneeb MahaboobCSWIP 3.2-89247/2IRCA-9001:2015 LAASNT-NDT-L2-RTFI-RT-UT-MT-PT.SAP#:70021650 APs:JAPID, QCS & QCI.''If you know any art by any means then SCULPT IT - no matter how cheap or useless it is - JUST SCULPT IT, you will never know when experts will be on demand''Date: 2018-12-30 16:42Subject: Re: [MW:28825] QW-283Minimum 5mm--On Sun, 30 Dec 2018 4:06 pm karthi <karthikeyandh@gmail.com wrote:Please give a proper detail about buttering ? section ix says that QW-283 is what does ? how much( mm) can do the buttering ? is there any restriction ?--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment