Greetings,
First of clear whether you want to make buttering on machined parts or weld joints or any damaged parts?
Buttering: read QW-283 fully and 283.3.
Weld repair or build up: check QW-202.3.
Usually company standards specifies, Buttering or weld build-up on the prepared surfaces shall not exceed the lesser of ⅓ of the base metal thickness or 10 mm, if exceeds you need company approval, this is just request upon certain owner requirements.
Thanks.
Regards,
Mohamed Muneeb Mahaboob
CSWIP 3.2-89247/2
IRCA-9001:2015 LA
ASNT-NDT-L2-RTFI-RT-UT-MT-PT.
SAP#:70021650 APs:JAPID, QCS & QCI.
''If you know any art by any means then SCULPT IT - no matter how cheap or useless it is - JUST SCULPT IT, you will never know when experts will be on demand''
Date: 2018-12-30 16:42Subject: Re: [MW:28825] QW-283Minimum 5mm--On Sun, 30 Dec 2018 4:06 pm karthi <karthikeyandh@gmail.com wrote:Please give a proper detail about buttering ? section ix says that QW-283 is what does ? how much( mm) can do the buttering ? is there any restriction ?--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment