Wednesday, December 5, 2018

[MW:28733] SA 194 nut to SA 36 plate fabricated pipe WPS

Dear Expert,

Is there any separate  wps required for welding  SA 194 nuts with SA 36 fabricated pipe.nut is used only for the support the insulation .shall be use 

Regards,
Deepu c

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35501] TEST COUPON ASME SEC IX

Yes, You can machine the Plate.  Prepare the Welding Running Sheet and mention 14 mm Plate machined to 8 mm Plate.  then the groove weld qua...