Re: [MW:28715] Weld metal build up to restore size-

Greetings,

Engineering practices for build up, upto 10mm or 1/3rd of the thickeness usually restored by of same WPS requirement and repair weld procedures, more than required thickness shall need special approval from owner / clients, anyhow its depend upon your scenario, please check below snapshots, it maybe useful.

---

Regards,

Mohamed Muneeb Mahaboob

CSWIP 3.2-89247/2 

ASNT-NDT-L2-RTFI-RT-UT-MT-PT.

SAP#:70021650 APs:JAPID, QCS & QCI.

E muneebslsa@gmail.com M +91-636-955-7189

(6:8) They say, "Why has no ˹visible˺ angel come with him?" Had We sent down an angel, the matter would have certainly been settled ˹at once˺, and they would have never been given more time ˹to repent˺.

 

From: Kannayeram Gnanapandithan

Date: 2018-12-01 15:01

To: materials-welding

Subject: [MW:28712] Weld metal build up to restore size-

Raw material--- C45 steel

, What is welding produre to build up for restoring required sizes

1, Filler metal,

2, Preheat and interpass, post heat temp

3. Before welding , raw material is to annealed or not??

4. After completion of welding, Any Heat treatment like Normalizing, Quenching and Tempering. 

urgent pl .

THANKS & BEST REGARDS,

KG.PANDITHAN, BE, IWE,  CSWIP 3.1,

ASNT-Level II in PT,MT,RT & UT.

International Welding Engineer. 

CONSULTANT-WELDING & QUALITY

Mobile no: +919940739349

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.