Re: [MW:28720] Auto Welding Copper back up strip fused with Root run

Hi

Please confirm, have you qualified the PQR, if qualified what was the material used as backing strip?

With Kind Regards

P Govindan 

On Tue, Dec 4, 2018 at 9:38 AM Ri@z <riaz.rafeeque@gmail.com> wrote:

Dear All, 

We are introduced auto welding on 6.62 MM thickness , API 5L X 70 .  J groove prepared with 2 mm root face and zero root opening. 

Root has supported with copper back up strip/Shoes

But after welding we observed that copper back up strip is melted and fused with root run. 

Kindly help to resolve the issue. What are the possible reason for the problem ?? 

With Regards

Riaz Rafeeque 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.