Re: [MW:28762] fillet weld , macroexammination , impact test

In order to be able to help you, it is necessary that you specify which Code you are using to make these tests.

El mar., 11 dic. 2018 a las 23:26, Souravbohray (<ermechsouravbohray@gmail.com>) escribió:

Q-1.. Single sided fillet weld is allowed for micro examination test for PQR testing ? if in drawing double fillet is given ?

Q-2.. In macro examination beyond the root incomplete penetration and fusion is allowed ?

Q-3... Notch toughness  is also consider for fillet weld ?

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--

Ing. José Juan Jiménez Alejandro

ASME Independent Consultant 

and Technical Manager SSI-TPI

Cel. +52 812 352 4606

Skype: jjjimeneza

Twitter: @jjjimeneza

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.