Re: [MW:22878] PQR for carbon steel with S'S lined

Dear raghuram,
Thnx fir the info I have checked in  QW 217 requirements and my case falls in QW 217 (b) becomes our cladding part is not included in design

Thnx to all for ur support
Irfan.

On 14 Feb 2015 07:19, "Raghuram Bathula" <raghurambathula@gmail.com> wrote:

Dear Irfan

Read QW217  requirements,  either (a) or (b) whichever is applicable to your case, then put forward your proposal, in case if you need further clarifications.........

On 13 February 2015 at 21:14, Rems Okonkwo <rems.okonkwo@gmail.com> wrote:

Dear Irfan,

You will have to provide more details like the St detail,  the CS details and the operating characteristics (MDMT)

Regards,

Rems
IWE Nigeria

On Feb 13, 2015 4:53 PM, "Irfan Mohammed" <irfan.qaqc@gmail.com> wrote:

Dear experts,
I have a situation I have to weld CS with SS lined pipe to CS with SS lined elbow.
CS pipe 10"/21.9mm with S'S clad 3mm internally
Pwht required, impact test not required.
Code of qualification- SEC IX & ASME Div II requirements.
Request you all to please advise on possible PQR qualification scenarios.

Thanks
Irfan

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVubnYavwmWFue-8Uc77LgnCUwkyXfGFR%3DBSxidw6JgsVeAw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADXGqGRTJ0o%2B84iczf9iMoyUMXE5fErxqd4ct5p7%3DmiB8d-FZg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.