Re: [MW:22808] ISO 15609 Part 1- WPS

To the coordinator of MW,

Of late I find that when a question is asked for expert opinion, some individuals are writing with names addressed to the individual who made the question. This is improper. This is a group forum and whatever is written is for all those who contribute and for benefit of all. Some are even asking for a reply etc etc...............

All questions must be generally worded so that any one in the group who wish to answer can do. All answers shd preferably be backed by std references appropriately or by personal experience.

Questions shd not be to resolve personal problems but to enhance and share knowledge. 

Some of my thoughts to improve the groups contribution. I know some of my friends have talked to me and even stopped contributing bcs some where we are not keeping self discipline among ourselves.

Rgds

G.Prakash

Independent Consultant, ASME AIS/ISO

Technical Director, Hitek Engg Services, Dubai
 gprakash31@gmail.com.

Tel: +9714 2778511 Mob:+97152 979 5678

On Wed, Feb 4, 2015 at 4:45 PM, meisam shokri arfaei <meisamshokri@gmail.com> wrote:

Dear Saravanan

Please have a look on the scope of the standard. This is mentioned there that, "This standard is part of series of standards....for more information see annex A of ISO 15607-2003.

Annex A of ISO 15607 has a table which define the relationship between all part of those standards.

Also Annexes B & C will be helpful. 

Regards

On Wed, Feb 4, 2015 at 2:55 PM, Saravanan Sornam <saravanshyla@gmail.com> wrote:

Dear Experts ,

When i review the ISO 15609 Part-1 for WPS preparation , it does not mention about Procedure Qualification method and testing.
It says only the format to be used for WPS and the necessary datas to be filled in.
So, my query is whether we need to fill the format and send to client for approval, before we start welding.
Is there any other part in ISO 15609 mention about Procedure Qualification and mechanical testing.
The material for the project is JIS SS 304L and the product is venturi tube, only GTAW process we plan to use.
Await for your reply.
Regards
Saravanan
Korea

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALV1rkLv56dqQcvvz3ydgxNfeo9Hc%2B%3DRYx%3D1CmtuBfR7PvcQkQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--

M. Shokri Arfaei

ISA-ISTS - Metallurgy Lab. Manager

ASNT NDT Level III

International Welding Engineer

Tel.: +98 21 66282127

Fax: +98 21 66282779

Mob.:+98 912 1394023

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAC8uMtu%3D4dzZRvBcMxh-MfEewOrT4T3p%3D-S1Wogz-N1NXT_5sw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOUP4qJDsoZY2k%2BTgnbLuP_CwDx2-%3D3OmsQ33TGKs4vG%3DzkuKg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.