Monday, February 9, 2015

[MW:22834] dear friends, is it possible to weld reinforcement pad over the longitudinal seam, if so please to give reference standard.

dear friends,  

       is it possible to weld reinforcement pad over the longitudinal seam, if so please to give reference standard.

 how to make a separation of reinforcement pad from the double seam pipe into three pad, is it seam also can include in the reinforcement pad ( normally pad is 120 degree )


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/25bb2f13-85e5-4215-9102-a3865ce1d106%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35633] IP Joint

Hello experts, I would like to know what is IP joints in piping(31.3)?  Regards Saurabh -- https://materials-welding.blogspot.com/...