[MW:22865] temper bead welding on S355JR hardened steel (Cold case)

Aftternoon all

I am ivestigating the cause of cracking that occured on hardened S355 JR steel and if its possible to use temper bead on cold case. I would like to compile a welding repair procedure using temper bead welding on hardened S355 JR steel and would appreciate any suggestions and assinstance in the direction addresing this. I would also like to find out whether this practice will be possible or rather what can be suggested as an alternative.

Regards

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c0c13df6-b2a6-4d9e-b9dd-2a2df747cfa6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.