Pl find below the interpretation. I believe I misrepresented in earlier mail.
Interpretation: VIII-1-89-33
Subject: Section VIII, Division 1 (1986 Edition, 1987 Addenda), UW-3
Date Issued: October 26, 1988
File: BC88-245, VIII-1
Question: A welding neck flange is welded with a butt weld at the tapered end of the flange extension to the pipe nozzle. Is this joint a Category C joint by location in UW-3(a)(3)?
Reply: Yes.
On Fri, Feb 6, 2015 at 8:18 PM, LINUS <linustech@gmail.com> wrote:
For WNRF Flange it is B. There is also an interpretation on this. Shall locate and post--
On Tuesday, February 3, 2015 at 2:27:51 PM UTC+5:30, Umar Rashid Makrani wrote:Dear Experts,As per UW-3, what will be the joint category of WN flange to nozzle weld. My opinion is Category B. Please advise with clarifications.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/e8538507-9ee6-4601-810c-2dde704fd2db%40googlegroups.com.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFgANgh1BHLxw2wgs9g3-Ga%3D-b_KaD4owuwaDsdFhpWsQS_nqw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment