Following two thing matches in the material as per NACE MR 0175,
1. Sulphour content <=0.010%
2. Hardness Value <=22 HRC
3. NACE Marking shall be require on material ( with Help of document also can certified)
Thank you very much
best of regards
RItesh Rajput
On Fri, Feb 6, 2015 at 7:59 PM, Srini Vasan <srinicwi@gmail.com> wrote:
Dear Expert's,
--
How we can differentiate CS materials and NACE materials when we stake cumulatively?
GA E-60021 what's this coding in the materials?
If it is a traceability means,is it mandatory on the materials?
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABMP0bNO_DU%2BiuexRXOe-4GD6%2B8dfdrgVb9WddKcGLchGcfR-A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAErPVf22PaTdccP-WDPGVo7uOU7iJz17FTcJifz8c6g-4BbsSw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment