[MW:22837] Re: IS IT POSSIBLE TO MAKE SPLIT TEE BY CUTTING ORDINARY TEE

WHAT ABOUT  THE NDT REQUIREMENTS?

On Monday, February 9, 2015 at 11:14:41 AM UTC+3, afzal ahmed wrote:

Dear Friends please Help me ,

 

We need Split Tee of 6"(SMLS SCH 40 ASTM A234 GR WPB) , but it is not available in market easily ,

1: Is it possible to make Split Tee by cutting ordinary Tee vertically

2: if Yes, then in which STD it is telling

3: & what are the NDT requirements

 

for more clarification See the attached file

 

its very urgent .....

 

 

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b0837447-7e7b-4259-adbe-f83a7499f5be%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.