Re: [MW:19119] Change in Supplementary Essential Need re-qualification?

Dear colleagues ,

could you clear my doubt and explain the 3 attached paragraph easily.


Ezzat

On 10/29/13, Saravanan Sornam <saravanshyla@gmail.com> wrote:
> Hi Ezat ,
>
> Change of Group No. is a Supplementary Essential Variable as per ASME-IX ,
> that is , if impact test exists in your vessel.
>
> 1) If you have PQR with impact test condition for P No.8 Gr. No.1
> qualified, then you have to use same P No.8 Gr. No.1 only for impact
>
> test vessels.
>
> 2) If your vessel does not have impact test , then you can revise the WPS
> with P No.8 Gr. No. 1 & 2, without Supplementary Essential
>
> Variable with the same impact tested PQR.
>
> In your case, you cannot use your WPS & PQR to weld P No.8 Gr. No.2 for
> impact test vessels, so you have to qualify a new PQR.
>
>
> Hope you are clarified.
>
>
> Regards,
>
> Saravanan,
>
> Korea
>
>
>
>
> On Oct 29, 2013 6:25 PM, "Ezat Adel" <ezatadel2008@gmail.com> wrote:
>
>> dear Dr. Georgios Dilintas i need your confirm it is need requalification
>> or did not need.
>> On Oct 29, 2013 11:05 AM, <george.dilintas@gr.bureauveritas.com> wrote:
>>
>>> Yes it does
>>>
>>> best regards
>>>
>>> Dr. Georgios Dilintas
>>>
>>> Authorized Nuclear Inspector
>>> Authorized Inspector Supervisor
>>> API 510 Inspector
>>> Prelude FLNG ASME Subject Matter Expert
>>>
>>> I&F REGIONAL TECHNICAL MANAGER
>>> BUREAU VERITAS HELLAS
>>>
>>> Tel: +30 210 40 63 113/4
>>> Fax: +30 210 40 63 118
>>> Cell: +30 69 44 64 62 04
>>> Korea cell phone: +82 10 2777 8922
>>>
>>>
>>> [image: Inactive hide details for Ezat Adel ---29/10/2013
>>> 10:57:21---Dear
>>> Experts, i need your clarify that the changes in material gro]Ezat Adel
>>> ---29/10/2013 10:57:21---Dear Experts, i need your clarify that the
>>> changes
>>> in material group number with the
>>>
>>> From: Ezat Adel <ezatadel2008@gmail.com>
>>> To: materials-welding <materials-welding@googlegroups.com>
>>> Date: 29/10/2013 10:57
>>> Subject: [MW:19105] Change in Supplementary Essential Need
>>> re-qualification?
>>> Sent by: materials-welding@googlegroups.com
>>> ------------------------------
>>>
>>>
>>>
>>> Dear Experts,
>>>
>>> i need your clarify that the changes in material group number with the
>>> same p number need another welding qualification or not.
>>>
>>> my case i have WPS for A312 grade TP 316, P no. 8 , group no. 1 to
>>> itself.
>>> it's right to use it to weld A312 grade TP 310s, P no. 8 , group no.
>>> 2 to itself.
>>>
>>> Ezzat
>>>
>>> --
>>> To post to this group, send email to materials-welding@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> materials-welding+unsubscribe@googlegroups.com
>>> For more options, visit this group's bolg at
>>> http://materials-welding.blogspot.com/
>>>
>>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>>
>>> The views expressed/exchnaged in this group are members personel views
>>> and meant for educational purposes only, Users must take their own
>>> decisions w.r.t. applicable code/standard/contract documents.
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Materials & Welding" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to materials-welding+unsubscribe@googlegroups.com.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>>>
>>> This message contains confidential information. To know more, please
>>> click on the following link: http://disclaimer.bureauveritas.com
>>>
>>> --
>>> To post to this group, send email to materials-welding@googlegroups.com
>>> To unsubscribe from this group, send email to
>>> materials-welding+unsubscribe@googlegroups.com
>>> For more options, visit this group's bolg at
>>> http://materials-welding.blogspot.com/
>>>
>>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>>
>>> The views expressed/exchnaged in this group are members personel views
>>> and meant for educational purposes only, Users must take their own
>>> decisions w.r.t. applicable code/standard/contract documents.
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Materials & Welding" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an
>>> email to materials-welding+unsubscribe@googlegroups.com.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Materials & Welding" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to materials-welding+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.