Dear Pradip,
There are 4 modes of metal transfer available for GMAW process.
1. Short circuit
2. Globular
3. Spray( For Argon use)
4. Pulsed
In your case short circuiting mode will be given better result than compare with other modes of transfer, but make sure that your welder skill is playing major role to maintain torch angle etc..
Regards,
J.V.S.Hemanth kumar
Senior Engineer
Operations I Welspun Middle East Pipes LLC
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Pradip Ghosh
Sent: Wednesday, October 23, 2013 7:39 AM
To: materials-welding@googlegroups.com
Subject: [MW:19048] Mode of Metal transfer for GMAW
Dear Expert,
Can any one tell me that what are the metal transfer mode available for GMAW and what type of metal transfer is suitable for down hand bottom fillet welding in MAG/GMAW
Pradip Ghosh
QA/QC Engineer
Mott Mac Donald
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Comments