Tuesday, October 22, 2013

Re: [MW:19046] SET PRESSURE FOR PRESSURE RELIEF VALVE FOR HYDROTESTING OF POWER PIPING

Dear Mr. Srinivasan,

you can refer to SAES A 004 for relief valve set pressure requirements

regards
Ratheesh.R
Ksa

On Tue, Oct 22, 2013 at 5:50 PM, srini vasan <nevazz21@gmail.com> wrote:
> dear reddy
>
> can i know in what std in aramco mentioned to test the RV 5% Above test
> pressure.
>
> with regards
> N.Srinivasan
>
>
> On Sunday, February 10, 2008 3:08:16 PM UTC+5:30, Sankepalli R.S.Reddy
> wrote:
>>
>> As per aramco project specifications, Test RVs to be set at 5% above test
>> pressure and tested within 1week/1month for new projects/maintenance work,
>> respectively.
>> regards
>>
>>
>> On 1/30/08, shailesh dave <snd...@yahoo.com> wrote:
>>>
>>> Dear Mr Dave
>>> Could you please resend this query with proper subject line? And also in
>>> future please don't hit reply button while starting new thread, instead u
>>> can create new mail and send to
>>> material...@googlegroups.com
>>>
>>> Best regards
>>> Raghuram Bathula
>>> ________________________________
>>> From: shailesh dave [mailto:snd...@yahoo.com]
>>> Sent: Wednesday, January 30, 2008 1:46 PM
>>> To: material...@googlegroups.com
>>> Subject: Re: [MW:537] Re: 533] Filler metal for P 11 (O/L SS 347) to P8
>>>
>>> Dear Members,
>>>
>>> Can anybody tell me at what pressure of hydrotest be safety relief valve
>>> set. What is the reference code.
>>>
>>> Regards,
>>>
>>> S.N.Dave
>>>
>>> QA/QC Manager
>>>
>>>
>>> ________________________________
>>> Never miss a thing. Make Yahoo your homepage.
>>>
>>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...