Dear Sir,
In general:
1. Welding current is the most influential variable in welding process which controls the electrode
burn off rate, the depth of fusion and geometry of the weldments.
2. Voltage is the electrical potential difference between the tip of the welding wire and the surface of the
molten weld pool. It determines the shape of the fusion zone and weld reinforcement. High welding voltage
produces wider, flatter and less deeply penetrating welds than low welding voltages. Depth of penetration is
maximum at optimum arc voltage.
On Tue, Oct 22, 2013 at 12:09 PM, suresh kumar <sureshk.p21@gmail.com> wrote:
--Dear ExpertsWhat is the effect of welding while the change in the following charecteristics beyond their range1. Voltage2.CurrentRegardsSureshkumar
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Thanks & Regards,
A Bharat Kumar
+91 9989717650
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment