Re: [MW:17852] SAW FLUX REUSAGE.

Dear Manoj,
Pls refer AWS D1.1 Cls 5.3.3.3, it is clearly
mentioned that you can use the mixture of used flux and virgin flux
but it does not affect the composition of the flux materials.

Thanks & Regards,
Bala

On 5/29/13, manoj john <manojacgnr@gmail.com> wrote:
> Dear Memebers,
>
> We are using SAW process for Carbon Steel welding but i have doubt in reuse
> of flux . My doubt is that on what basis we can reuse the electrode i am
> not able to find any standard or guide line for reusing. We are reusing
> the fluxes mixed with 20% used and 80% new flux, is it OK and please give
> me some information for reusing of flux or mixing of used flux with new
> flux.
>
> Thanks in advance.
>
> Manoj
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.