When your shell is SS, tubesheet has to be solid ss; cladded tubesheet will not be effective. Check the design. Anyway recommended tubesheet is explosion bonded material. It is very tricky to weld tubes to tubesheet (with weld overlay)and that too with PWHT; cracking is a big concern.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Branko Ferencak
Sent: Monday, May 27, 2013 5:38 PM
To: materials-welding@googlegroups.com
Subject: [MW:17817] Welding and cladding SA-516 Gr. 60 + AISI 410S
I have shell 20mm thick ( SA-516 Gr, 60 ) and there must be cladd AISI 410S 3mm
Could anybody tell me which filler i can use, for SAW and GMAW?
GMAW i planning use for flanges and tubesheets ( after i overlay tubesheet - what is procedure for welding tube to tubesheet? )
Also PWHT has been asked by customer after overlay.
Can anybody tell the effect of PWHT on SS 410S overlay?
What will be the the safe range of temperature of PWHT? ( Also recommended temperatures and times, holding cooling...)
Best regards,
Branko Ferencak
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment