Re: [MW:17743] Re- baking temperature for SS electrodes

Dear Mr. Sankaran 

Normally the electrodes those are having low hydrogen flux coating is only required for baking.But for S.S electrodes it doesn't require any baking.Correct me if I am wrong.

Thanks & Regards

LALU R.P

  

On Tue, May 21, 2013 at 12:15 PM, Sankaran Sp <subasankaran@yahoo.co.in> wrote:

Dear Experts,

We are in need to prepare the procedure for "storage and drying conditions for covered arc welding electrodes"

while referring the ASME sec II part C standards - SFA 5.1 Table A3 have temperature for Carbon steel electrodes, SFA 5.5 Table A.2 have temperature for alloy steel electrodes.

For SFA 5.4 S S electrodes no details are available in this standard.

Can you guide me ? how to get the temperature for SS electrodes ? like ( E 410,E430,E 308,E 309Mo,E 316 type electrodes).    

For re drying or re baking of SS electrode,What standards to refer?,kindly give your ideas to complete the procedure.

Regards,

Sankaran.Sp

Coimbatore,India.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.