Re: [MW:17811] Using of electrodes (2.5mm) one brand upto certain thickness and using 3.2 mm electrodes of other brand in remaining thickness.

If brand name specifies in WPS, before doing the job revise the WPS with all approvals and check impact test requirement.

 

Regards,

On Mon, May 27, 2013 at 7:53 AM, Talluri Venkataramana <venkataramana.talluri12@gmail.com> wrote:

Dear experts

Kindly guide me Using of electrodes (2.5mm) one brand upto certain thickness and using 3.2 mm electrodes of other brand in remaining thickness. Our scope is welding of 12mm thick Pipe in offshore platform. we have 3.2mm electrodes of Manitowoc and 2.5mm electrodes of ESAB. Specification of electrode is AWS A5.5, E9018M-H4. 

As per my opinion with the same mechanical properties can be used. Guide me if any thing is different.

--

Best Regards

T.V.Ramana

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--

With best regards,
Bobba Rama Prasad

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.