Dear Victor:
In our project we have similar requirements for Duplex and Super Duplex as James mentioned (regardless of thickness) where it requires impact test at -46 degC and results should demonstrate average of minimum 27J and no result less than 20J).
In our project we have similar requirements for Duplex and Super Duplex as James mentioned (regardless of thickness) where it requires impact test at -46 degC and results should demonstrate average of minimum 27J and no result less than 20J).
Regards
On Wed, May 22, 2013 at 3:24 PM, james gerald <gerry_tup@yahoo.com> wrote:
Impact test not required/cannot be performed if the thickness is below 2.5mm.Check with Metallurgy Lab whether they can machine your sample with thickness 3.73mm and perform Impact.If yes, then Impact test need to be performed at -46/-50degC for Duplex.Thanks & RegardsJ.Gerald Jayakumar
00968-99438165
From: victor george <dvgeorge@gmail.com>
To: materials-welding@googlegroups.com
Cc: Arul prakash <r.arulprakash@gmail.com>
Sent: Wednesday, May 22, 2013 2:33 PM
Subject: [MW:17738] Impact test- minimum thk requirement
--Hi Experts,Please explain what is the minimum thickness requirement of impact test.Material: A790 S31803 pipeSize: 1/2' Sch 80 (WT- 3.73mm)Sour serviceQuestion: Is it possible to do impact test on 3.73 thk?Best Regards,DV.George
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment