Thanks Gents.
It is very clear that impact test shall be performed up to 2.5mm thk.
Appreciate all your valuable guidance.
Best Regards,
Victor.
On Thu, May 23, 2013 at 6:51 AM, kannayeram gnanapandithan <kgpandithan@gmail.com> wrote:
2/3 of 27 joules is also acceptable in some codes
Pandithan
welding consultant
On 5/22/13, Ramin Kondori <raminkondori@gmail.com> wrote:
> *Dear Victor:*
>> *Ramin Kondori*
> In our project we have similar requirements for Duplex and Super Duplex as
> James mentioned (regardless of thickness) where it requires impact test at
> -46 degC and results should demonstrate average of minimum 27J and no
> result less than 20J).
>
> Regards
> *Sr. QA/QC Engineer
> *
> *SINOPEC*
>>> *From:* victor george <dvgeorge@gmail.com>
> r.kondori@petroyada.com
> +98-2123592322
> +98-9132150320
>
>
> On Wed, May 22, 2013 at 3:24 PM, james gerald <gerry_tup@yahoo.com> wrote:
>
>> Impact test not required/cannot be performed if the thickness is below
>> 2.5mm.
>>
>> Check with Metallurgy Lab whether they can machine your sample with
>> thickness 3.73mm and perform Impact.
>>
>> If yes, then Impact test need to be performed at -46/-50degC for Duplex.
>>
>> Thanks & Regards
>>
>> J.Gerald Jayakumar
>> 00968-99438165
>> *To:* materials-welding@googlegroups.com
>> *Cc:* Arul prakash <r.arulprakash@gmail.com>
>> *Sent:* Wednesday, May 22, 2013 2:33 PM
>> *Subject:* [MW:17738] Impact test- minimum thk requirement
>>
>> Hi Experts,
>>
>> Please explain what is the minimum thickness requirement of impact test.
>>
>> Material: A790 S31803 pipe
>> Size: 1/2' Sch 80 (WT- 3.73mm)
>> Sour service
>>
>>
>> Question: Is it possible to do impact test on 3.73 thk?
>>
>>
>> Best Regards,
>> DV.George
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Materials & Welding" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to materials-welding+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views
>> and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Materials & Welding" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to materials-welding+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/groups/opt_out.
>>
>>
>>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Comments