Re: [MW:17804] Range of Qualification of the thickness for the Weldolet and Sockolet

Please find attached useful infor related to your question.

Set-in - T is essential

Set-in - t is esential

 

On Mon, May 27, 2013 at 6:24 AM, Sasi Kumar <rsasi1982@gmail.com> wrote:

Dear Experts

Good morning every bodies. Could you please advise me the range of the Qualification of the thickness for the weldolet and sockolet while the range of the qualified thickness for the groove weld is 52.38 m.m . I want to weld the 70 m.m. thick weldolet  But I have the WPS untill 52.38 m.m groove weld. It is possible to use the same procedure or what i have to do solve this issue. Please advise me.

Thanks and Regards

Sasikumar.R

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.