Monday, May 27, 2013

[MW:17818] 9.3.8 Slag Inclusions API 1104 RT

Dears experts\
there is acceptance  for ISI & ESI  RT  1104  my question  is  in case one of these conditions is found  for example
when i  have done interpretation I found indication ESI has width   2mm  and length 9mm  this indication rejected because it exceed 1.6mm   or not because  it should be has length more then 2" to rejected .  
regards
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34919] Welder qualification certificate

Dear All     anyone can share a format for welder certificate and card format        Thanks & Best Regards Saleem manhappulath Mob:+9665...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...