Thursday, May 23, 2013

[MW:17769] thickness limits for SA 234 Gr.WPB pipe fittings

Dear friends
Vendor has manufactured seamless pipe fittings SA 234 Gr.WPB like elbows (3" SCH 40, 90 degree) and reducers (6" X 3" SCH 40).
Dimensons have to be checked as per ASME B16.9.
The under limit on thickness mentioned is - 12.5%.
I would like to know the Over Limit on thickness for pipe fittings as per ASME B16.9.
Regards
Prem Nautiyal
(Sr. Surve
 
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35501] TEST COUPON ASME SEC IX

Yes, You can machine the Plate.  Prepare the Welding Running Sheet and mention 14 mm Plate machined to 8 mm Plate.  then the groove weld qua...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...