Re: [MW:17739] Impact test- minimum thk requirement

Impact testing is not related to min or max materials thickness it is as per the project and code specification, check your project and design requirements

 

Very Best Regards

Behrooz Alavi

From: victor george <dvgeorge@gmail.com>
To: materials-welding@googlegroups.com
Cc: Arul prakash <r.arulprakash@gmail.com>
Sent: Wednesday, May 22, 2013 1:33 PM
Subject: [MW:17738] Impact test- minimum thk requirement

Hi Experts,

 

Please explain what is the minimum thickness requirement of impact test.

 

Material: A790 S31803 pipe

Size: 1/2' Sch 80 (WT- 3.73mm)

Sour service

 

 

Question: Is it possible to do impact test on 3.73 thk?

 

 

Best Regards,

DV.George

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.