N, If your weight is certified, traceable to any national standard, recalibration by lifting capacity is usually enough. Additionally, if you have a ferromagnetic plate with artificial flaws at different depths (like in a Keto's ring), it would be more in your favour if you demonstrate to what depth your yoke is good enough. SV --- On Mon, 19/4/10, Nishad AK <nishadamk@gmail.com> wrote:
From: Nishad AK <nishadamk@gmail.com> Subject: [MW:4868] Calibration of MPI yoke and validity. To: materials-welding@googlegroups.com Date: Monday, 19 April, 2010, 2:05 PM
Good day, I have a query regarding the calibartion of MPI yoke both Electomagnetic & permanent magnetic type. Does that should hold a Valid calibration certificate by the Third party calibration body or is that ok it has the manufactures certificate showing the weight lifting capacity and other test results.
-- Thanks and Regards
Nishad AK
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment