Re: [MW:4844] requirements for PWHT

hi, as per aASME section-VIII-UCS56,if the welded joint nominal thicknessthickness more than 38mm shall be PWHT. As per ASME Section-1,PW-39.Welded joint htickness more than 19mm shall be PWHT.Pls.Refer with the applicable code.   Karthikeyan.S   Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Sat, 4/17/10, manpreet <manpreetsin88@rediffmail.com> wrote: From: manpreet <manpreetsin88@rediffmail.com> Subject: [MW:4838] requirements for PWHT To: materials-welding@googlegroups.com Date: Saturday, April 17, 2010, 12:22 PM Dear All My case is that P1 group Gr.no.2 ,thickness-(16 to 200) Welding process -SAW Is it required to do PWHT & also the appropriate code & standards if it is required. Regards Manpreet Singh 09867303228 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.