Thanks, Karthik. Now, could you please give me a Code ref for this info? We always need to back what we say up with Code ref. Appreciate your time and efforts, S Vagal
--- On Wed, 7/4/10, Karthik <karthik6684@yahoo.com> wrote:
From: Karthik <karthik6684@yahoo.com>
Subject: RE: [MW:4732] Qualification range - AWS D1.1
To: materials-welding@googlegroups.com
Date: Wednesday, 7 April, 2010, 11:30 AM
Yes can weld SMAW alone ,but the thickness shall be within the qualified Range.
Karthikeyan.S Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282
--- On Tue, 4/6/10, Shashank Vagal <nach_sam@yahoo.com> wrote:
From: Shashank Vagal <nach_sam@yahoo.com>
Subject: RE: [MW:4724] Qualification range - AWS D1.1
To: materials-welding@googlegroups.com
Date: Tuesday, April 6, 2010, 8:13 PM
| Hi, Sorry, the test coupon was 8"dia x 1/2" thick. My mistake. Root, HP - SMAW, Rest- FCAW. Now, with this can the welder use SMAW alone to weld on some other joints within the Code ? Hope I am eligible for an answer this time. Thanks, S Vagal
--- On Tue, 6/4/10, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
From: Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com>
Subject: RE: [MW:4713] Qualification range - AWS D1.1
To: materials-welding@googlegroups.com
Date: Tuesday, 6 April, 2010, 9:51 AM
also note that qualification required on =>1/2" thickness pipe. Hi, AWS D1.1 does not restrict weld metal deposit. It restrict base metal thickness.
Regards,
Ibrahim
On 5 April 2010 17:53, Shashank Vagal <nach_sam@yahoo.com> wrote: | Hi all, We qualified some welders to 6GR on 6" dia x 7 mm thick pipes using SMAW for root + hp (deposited about 4 mm) followed by FCAW. Now, if we want to use these welders for full SMAW - i) Is it allowed? ii) What is the new qualification to? S Vagal |
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
The INTERNET now has a personality. YOURS! See your Yahoo! Homepage. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
| -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
Your Mail works best with the New Yahoo Optimized IE8.
Get it NOW!.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment