Since you are in UAE you can contact FTV Proclad at the following
address, they are specialists in cladding automation (it is located next
to NPCC)
Mr. David Neill - Group Technical Director
FTV PROCLAD (UAE) L.L.C
P.O. BOX No 31714, ABU DHABI
EMAIL dneill@ftvproclad.com
TEL +9712 5549303, MOB +971506163625
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Rakesh
Sent: Tuesday, April 06, 2010 2:41 AM
To: materials-welding@googlegroups.com
Subject: Re: [MW:4700] RE: 4661] Overlaying / cladding machine
The project requirement is cladding /overlaying. Detail engg is yet to
be done. That means we are open to the process depending upon which
process works better.
Some nozzles are likely to experience high velocity. This requirement is
for those nozzles Regds Rakesh Pandey
Rakesh Pandey, Integrity Engineer,
ADMA OPCO (ADNOC group company). +971-50-1336971
-----Original Message-----
From: "PB HEGDE" <hegde.pb@isgec.com>
Date: Mon, 5 Apr 2010 13:42:26
To: <materials-welding@googlegroups.com>
Subject: [MW:4697] RE: 4661] Overlaying / cladding machine
Hi,
Insitu cladding by machine is very difficult Howover which type of
process and area you want to overlay This is important from method
point of view.
Regards
Hegde
-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of Rakesh
Sent: Monday, April 05, 2010 11:38 PM
To: materials-welding@googlegroups.com
Subject: [MW:4661] Overlaying / cladding machine
Hi
I was looking for some information on portable Overlaying / cladding
machine for insitu job on nozzles of various dia. Can any body through
some light on make / model and avalability Regards Rakesh Pandey
Rakesh Pandey, Integrity Engineer,
ADMA OPCO (ADNOC group company). +971-50-1336971
Filtered by Hosted Filtering
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To unsubscribe, reply using "remove me" as the subject.
No comments:
Post a Comment