Weld Meatal. PSP
On Fri, 26/2/10, george.dilintas@gr.bureauveritas.com <george.dilintas@gr.bureauveritas.com> wrote:
From: george.dilintas@gr.bureauveritas.com <george.dilintas@gr.bureauveritas.com>
Subject: Re: [MW:4382] Failure of PQR in All Weld Tensile
To: "materials-welding" <materials-welding@googlegroups.com>
Date: Friday, 26 February, 2010, 12:48 PM
Where do you get the failure? Base or weld metal?
From: prashant pansare [prashantpan_99@yahoo.co.in] Sent: 26/02/2010 12:39 ZE5B To: mat wel <materials-welding@googlegroups.com> Cc: par kat <paresh.katvi@bg-group.com>; roj abra <roji.abraham@bg-group.com> Subject: [MW:4381] Failure of PQR in All Weld Tensile | Dear All, We are working on PQR & deatails are as folows : Appl. Code - DNV OS F101,2000 PQR - Through THickness Repair. (SMAW) Base Metal - API 5L X GRADE 60 - 12.75" OD X 14.3 mm THK. Filler Metal - E-7018 H4R Position -6G After mechanical tests, we are getting all values in acceptable limits except All Weld Tensile results.(Reqd- 517 Mpa & Actual - 483 / 493 Mpa) What is the reason & solution for the same? Pl. reply. PSP |
Your Mail works best with the New Yahoo Optimized IE8. Get it NOW!. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
The INTERNET now has a personality. YOURS!
See your Yahoo! Homepage.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment