Re: [MW:4328] Re: Tolerance Level & need of torquing

You can review in ASME B16.5

 

Best Regards

Agustin

---

De: israr <ahmedisrar.nm@gmail.com>
Para: Materials & Welding <materials-welding@googlegroups.com>
Enviado: mar, febrero 16, 2010 2:31:25 AM
Asunto: [MW:4320] Re: Tolerance Level & need of torquing

Flange Bolt hole Center to center  Diameter tolarance is 1.6mm, Offset
should be 0.8mm which is acceptable, but is not given in any code and
std.

Regards
Israr Ahmed
+966530417332

On Feb 14, 6:40 am, AAKARSH PP <aakarsh...@gmail.com> wrote:
> Dear sirs,
> For the firefighting deluge system, what is the flange to flange
> offset tolerance max. allowed &  do we require the torquing of the
> same(Size of stud bolt -5/8", spiral wound gasket,WNRF).
>
> Thank you
> Aakarsh

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

---

¡Obtén la mejor experiencia en la web!
Descarga gratis el nuevo Internet Explorer 8
http://downloads.yahoo.com/ieak8/?l=e1