Hi,
Is the construction as per AWS D1.1?. Or check your client spec. asked for this?.
Regards,
Ibrahim
On 8 April 2010 16:27, Rathinavel Arumugam <rathinavel1976@gmail.com> wrote:
--Dear All !I have one job for marine classification. Material is AISI 4140 and dia id 355. Our Surveyor is insisting for Longitudinal Tensile Test and it cause huge material wastage. Is it approved to go with Transverse direction Test piece for Tensile Test and if so what is the acceptance critiria?Please Clarify!A.Rathinavel[ QA/QC MANAGER / CSWIP 3.1 ]
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & Regards
Muhammed Ibrahim PK
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment