Re: [MW:28660] PQR testing with RT & UT

Hi, 

You mention about wps nd pqr. But my clarification is for welder performance qualification test. In ASME IX mention instead of mechanical test we can do UT or RT . All the process are mention there but FCAW are not mentioned in QW-304. That was my question. Is that the code is considering GMAW nd FCAW are same?  

Thank You 

Saif Uddin

On Thu, Nov 22, 2018 at 4:27 PM Saif <saif.jesan01@gmail.com> wrote:

Hi,

I have one clarification about QW-304. There mention Volumetric test can be perform for WPQR. But process there mention FCAW are not in this. So, what can i do for FCAW process? Is there any code reference that GMAW & FCAW are considering same process?

Thank You

Saif Uddin

Quality Manager

NDE Steel Structure Limited.

On Saturday, 16 July 2011 10:46:02 UTC+6, Karthik wrote:

Hi, There is no such specification in ASME Sec.IX. As per ASME Sec.IX mechanical tests only to be conducted for WPS/PQR regardless of Process(es). But most of the companies do RT or UT before doing mechanical tests to confirm that there is no defect.But this is not a Code requirement. QW-202 Type of Tests Required QW-202.1 Mechanical Tests. The type and number of test specimens that shall be tested to qualify a groove weld procedure are given in QW-451, and shall be removed in a manner similar to that shown in QW-463. If any test specimen required by QW-451 fails to meet the applicable acceptance criteria, the test coupon shall be considered as failed.   Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Fri, 7/15/11, ABHISHEK GHOSH <ghoshabh...@gmail.com> wrote: From: ABHISHEK GHOSH <ghoshabh...@gmail.com> Subject: [MW:11740] PQR testing with RT & UT To: material...@googlegroups.com Date: Friday, July 15, 2011, 10:57 PM Dear Experts,  Why UT along with RT is performed while qualifying a procedure with FCAW welding, At which clause in ASME 9 it is mentioned that UT & RT both has to be performed ??  With regards.  AG -- ABHISHEK GHOSH FAHAHEEL, KUWAIT MOB: (00)965-65772043

-- To post to this group, send email to material...@googlegroups.com To unsubscribe from this group, send email to materials-weld...@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.