Yes, QW-355 is clear, GMAW / FCAW.
Regards,
Mohamed Muneeb Mahaboob
CSWIP 3.2-89247/2
ASNT-NDT-L2-RTFI-RT-UT-MT-PT.
SAP#:70021650 APs:JAPID, QCS & QCI.
(6:59) He has the keys to the realm that lies beyond the reach of human perception; none knows them but He. And He knows what is on the land and in the sea; there is not a leaf which falls that He does not know about and there is not a grain in the darkness of the earth or anything green or dry which has not been recorded in a Clear Book.
Date: 2018-11-23 08:38Subject: Re: [MW:28660] PQR testing with RT & UTHi,Please refer Table QW-355, it clearly specified as FCAW included.Thanks& Regards,
(Karthik)
Karthikeyan.S
QA/QC ManagerAgon Pacific Co.,Ltd.M: +66-655-174-397, +66-892-512-282E-mail : karthik6684@yahoo.com
--On Thursday, November 22, 2018, 5:27:26 PM GMT+7, Saif <saif.jesan01@gmail.com> wrote:--Hi,I have one clarification about QW-304. There mention Volumetric test can be perform for WPQR. But process there mention FCAW are not in this. So, what can i do for FCAW process? Is there any code reference that GMAW & FCAW are considering same process?Thank YouSaif UddinQuality ManagerNDE Steel Structure Limited.On Saturday, 16 July 2011 10:46:02 UTC+6, Karthik wrote:
Hi,There is no such specification in ASME Sec.IX. As per ASME Sec.IX mechanical tests only to be conducted for WPS/PQR regardless of Process(es). But most of the companies do RT or UT before doing mechanical tests to confirm that there is no defect.But this is not a Code requirement.QW-202 Type of Tests Required
QW-202.1 Mechanical Tests. The type and number of
test specimens that shall be tested to qualify a groove weld
procedure are given in QW-451, and shall be removed in
a manner similar to that shown in QW-463. If any test
specimen required by QW-451 fails to meet the applicable
acceptance criteria, the test coupon shall be considered as
failed.
Thanks & Regards,(Karthik)Karthikeyan.SQA/QC ManagerGetabec Energy Co.,Ltd.379,Moo6,Soi8,Nikhomphatana,Rayong-21180,Thailand.Phone: 0066 38 897035-8 (Off)Fax: 0066 38 897034Hand Phone: 0066 892512282
--- On Fri, 7/15/11, ABHISHEK GHOSH <ghoshabh...@gmail.com> wrote:
From: ABHISHEK GHOSH <ghoshabh...@gmail.com>
Subject: [MW:11740] PQR testing with RT & UT
To: material...@ googlegroups.com
Date: Friday, July 15, 2011, 10:57 PM
Dear Experts,--Why UT along with RT is performed while qualifying a procedure with FCAW welding, At which clause in ASME 9 it is mentioned that UT & RT both has to be performed ??With regards.AG
--
ABHISHEK GHOSH
FAHAHEEL, KUWAIT
MOB: (00)965-65772043
To post to this group, send email to material...@ googlegroups.com
To unsubscribe from this group, send email to materials-weld...@ googlegroups.com
For more options, visit this group's bolg at http://materials-welding. blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment